Samsung Corby Mobile

 Tutorial on updating the firmware of samsung corby to S3650XEIJ2

Step1-

SAFETY FIRST- Make sure that u backup all your files, messages ,contacts, etc from your phone....
Download s3650xeij2 firmware from here- http://www.mediafire.com/?ogmzmgzdj5l
Download Multiloader v5.56 from here- http://www.4shared.com/file/TAf-S0eQ/MultiLoader_V556.html
Remove SIM CARD and MEMORY CARD from your mobile.....
Turn off your phone then Press Volume down button, camera button and end key at once.
Now this screen should come up :

Step2-

Now connect your phone to the pc in media player mode via usb cable and open the Multi Loader 5.56..
Multi Loader screen shot

Step 3:

STEP 3-
Now extract the downloaded firmware to any folder.......
And open Multiloader v5.56....

 1)  Put a tic on 'full download'.. leave others alone
      
 2)  For BOOT choose "boot files" folder from the extracted S3650XEIJ2 Firmware

 3)  For AMSS select apps_compressed.bin

 4)  For Rsrc1 select Rsrc_S3650_Open_Europe_Slav.rc1 (the name may vary but extension should be the same '.rc1' )

 5)  For Factory FS select FactoryFs_S3650_Open_Europe_Slav.ffs (the name may vary but the extension should be the same '.ffs')
       
 6)   Ignore 'FOTA' , 'Tune' and 'ETC'

 7)  Click Port Search and when found put a tick....

 8)  Then Click download and wait till it finishes..
       it will take 5 to 7 minutes and then unplug the usb cable  and turn on your new phone!